Press in valve cover fittings for the Nissan S13 SR20DET (red and black top). Exhaust side. Double sided 10AN male connections.
Press-in fitting breather fitting for the Nissan KA24DE valve cover. 10AN male swivels 360 degrees. Stainless steel and aluminum construction.
This stainless steel and aluminum fitting presses into the S14/S15 Nissan SR20DET valve cover on the intake side and replaces the PCV valve with a ...
Ver todos los detallesSubmersible PTFE tubing for use with submerged fuel pumps. 3/8" ID.
Radium Engineering Submersible PTFE Fuel Tubing 5/16in x 17.7in Long
Brackets for holding aftermarket high-flow fuel lines to underside of the GR Supra. Uses all factory mounting locations.
Adapter fitting clips on to the valve cover vent fitting on the BMW B58 engine and converts to a 10AN male.
This swivel fitting installs into the BMW B58 valve cover found on the A90/A91 GR Toyota Supra. It allows connection of a 10AN hose.
High flow distribution block designed to work with large -10AN and -12AN lines. Can combine three lines into one. Safe for use with alternative fue...
Ver todos los detallesReplacement fitting for Radium Engineering Direct Mount Regulators (Gen 2 design).
8AN PTFE hose and hose-end fittings. 14.7 feet of hose (4.5m). Two straight hose ends, two 90 degree hose ends and two 45 degree hose ends. This h...
Ver todos los detalles6AN PTFE hose and hose-end fittings. 14.7 feet of hose (4.5m). Two straight hose ends, two 90 degree hose ends and two 45 degree hose ends. This h...
Ver todos los detallesSet of brackets to retain fuel lines and brake lines on underside of Nissan vehicles including S13, S14, R32, R33, R34 and more. Billet aluminum, w...
Ver todos los detallesPress in fitting that swivels after installation. 10AN male. Made for 17.5mm hole.
For use with Radium dry-break fuel cell fill receivers. Includes lanyard
Clear fuel filler hose. 36" length. 1.5" ID. Clamps included.
Low profile adapter for SAE quick-connect lines. 90 degree elbow, converts to 6AN male. Compatible with all fuel types.
Low profile adapter for SAE quick-connect lines. 90 degree elbow, converts to 6AN male. Compatible with all fuel types.
Flexible fuel filler hose. 3 foot long, 1.5" inside diameter. T-bolt clamps included.
Catch can fitting with integrated steel ball. This valve closes when inverted to prevent oil loss out of the fitting in case of an accident. Alumin...
Ver todos los detallesSet of 5 brackets. Attach to locations on the underside of the Nissan R35 GT-R to hold fuel lines and/or battery cables or other items.This Part F...
Ver todos los detallesThis 360 degree swiveling fill neck bolts directly on to the Radium FCST (not FCST-X) at the 6-bolt fill neck location. Hose barb elbow will accept...
Ver todos los detallesUniversal in-line check valve with adapter fittings. Can be set up for a variety of hose -AN sizes. Compatible with all fluids.
Universal in-line check valve with adapter fittings. Can be set up for a variety of hose -AN sizes. Compatible with all fluids.
Straight fill neck for 1.5" ID fill hose. 6-bolt flange. For use on Radium Fuel Cell Surge Tank systems. Integrated check valve flapper. Not compat...
Ver todos los detallesBolts to underside of car to support aftermarket fuel lines. Same as brackets used in Radium fuel plumbing kit 20-0529-0X.
Press fit swiveling low profile -AN adapter. Commonly used in valve covers. Stainless steel body with anodized aluminum swiveling -10AN male fitting.
Pack of 15 aluminum acorn nuts. 10-32 thread. Non conductive. For use with Radium electrical studs.
Radium Engineering 12AN Female Fitting to Air Filter
INSTALLATION INSTRUCTIONS AVAILABLE AT RADIUMAUTO.COM
INSTALLATION INSTRUCTIONS AVAILABLE AT RADIUMAUTO.COM
For use with the Radium Engineeing Evo X fuel pump hanger. This small part plugs the hole for the fuel tank pressure sensor. In some parts of the w...
Ver todos los detallesCNC machined aluminum. For 0.39 diameter tube. M6 screw included.
CNC machined and anodized. Uses OEM mounting studs and hardware. No drilling required.This Part Fits: Year Make Model Submodel 1993-1998 Toyota ...
Ver todos los detallesCNC machined aluminum and laser engraved. Stainess steel press in portion. Swivels after installation.This Part Fits: Year Make Model Submodel 1...
Ver todos los detallesCNC machined aluminum and laser engraved. Stainess steel press in portion. Swivels after installation.This Part Fits: Year Make Model Submodel 1...
Ver todos los detallesRadium Engineering Submersible PTFE Fuel Tubing 3/8in 6.5in Long
Line and fittings for remote mounting a pressure gauge or pressure transducer. 1/8NPT compatible. Gauge sold separately.
CNC machined aluminum and anodized black. Mounts to frame rail using pre-existing holes.This Part Fits: Year Make Model Submodel 1993-1998 Toyot...
Ver todos los detallesRadium Engineering Submersible PTFE Fuel Tubing 5/16in x 6.5in Long
Radium Engineering Filler Neck Block-Off Kit
Radium Engineering 2013+ Subaru BRZ / Scion FR-S ECU Mount KitThis Part Fits: Year Make Model Submodel 2013-2016 Scion FR-S Base 2013-2017 Sub...
Ver todos los detallesRadium Engineering Fuel Filter Mount and Filter Clamp EVO XThis Part Fits: Year Make Model Submodel 2015 Mitsubishi Lancer Evolution Final Editi...
Ver todos los detallesRadium Engineering 5/16in SAE Female to 6AN Male Low Profile
Radium Engineering Fuel Cell Weld Flange 24-Bolt Aluminum
Replaces OEM fuel feed tube on the firewall to the engineThis Part Fits: Year Make Model Submodel 2015-2017 Subaru WRX Base 2015-2017 Subaru W...
Ver todos los detallesRadium Engineering 3 Into 1 Distribution Block w/ Fittings
Radium Engineering 2-Piece Fuel Pump Clamp 60mm - Black W/ Logo
{"one"=>"Seleccione 2 o 3 artículos para comparar", "other"=>"{{ count }} de 3 artículos seleccionados"}
Seleccione el primer artículo para comparar
Seleccione el segundo artículo para comparar
Seleccione el tercer elemento para comparar
