Radium Engineering

Fuel surge tank compatible with Bosch BR540 or DW400 pumps. Can hold up to three pumps. Fuel pumps sold separately and must be installed by the end...

Reusable black anodized aluminum Push-Lok hose ends.

Single catch can kit for the 2005-2013 Chevrolet Corvette. Interfaces with crankcase vent hose to intercept oil and other contaminants a keep them ...

In-tank fuel pump hanger for Honda models. Compatible with Walbro GSS342 or other pumps with similar form factor and wiring connections.This Part F...

Adapter for 24AN male. To be used with Radium fuel fillers, part numbers 20-1005-V and 20-1004-V.

Drop-in surge tank system for competition fuel cells. Designed for Bosch BR540 style pumps (pumps sold separately). Easily serviceable with new li...

Drop-in surge tank system for competition fuel cells. Single lift pump and two primary pumps included. Easily serviceable with new lift-out fuel p...

Remote mounted fuel filler point. Standard filling, features a screw off lid. Backside features a 24AN male with a 75 degree angled neck for 1.5" I...

Complete refueling kit for Radium Engineering FCST-X equipped fuel cells. Includes a remote mounted filler with dry-break receptacle, 1.5" x 3ft fi...

Radium Engineering 11-14 Ford Mustang GT / Boss 302 / V6 Coolant Tank KitThis Part Fits: Year Make Model Submodel 2011-2014 Ford Mustang GT

Drop-in fuel pump hanger for the 2022+ Subaru BRZ, Toyota GR86. Can be used with one or two compatible fuel pumps (sold separately). E85 compatible...

Black anodized aluminum. Used for fuel cell filling applications. Wrench included.

Single catch can kit for the 2009-2015 Cadillac CTS-V. Interfaces with the PCV breather line. Easy bolt-in installation. Features Radium's patented...

In-tank fuel pump hanger for Honda models. Compatible with Walbro F90000-series pumps or other pumps with similar form factor and wiring connection...

Can be used on standard hose, hose clamps not recommended

Bolt-on fuel rail for the Honda F and H series FWD engines. Compatible with stock or aftermarket fuel injectors. 8AN ORB ports. Available in black...

Single oil catch can kit for the Cadillac CTS-V (LSA engine). Interfaces with crankcase vent line to filter oil out of the blow-by gasses and keep ...

Wrench-together 6AN 45-degree hose end for use with Radium universal PTFE Hose Kits.

Polycarbonate and aluminum access cover is installed over the fuel pump module area in the 1989-97 Mazda Miata MX-5. This decorative cover provide...

Newly redesigned in-tank fuel hanger for the Mitsubishi Evolution X. Can be used with single or dual pump. Compatible with Walbro F90000-series fue...

Bolt-in fuel filter mounting bracket for various Nissan models. Compatible only with Radium fuel filters. Filter sold separately.

Complete refueling kit for Radium Engineering FCST-X equipped fuel cells. Includes a remote mounted filler with screw-off cap, 1.5" x 3ft fill hose...

Features roll-over protection and discriminator functionality. For use with Radium FCST and Radium quick-fill systems.

Clear polycarbonate fuel pump access cover for 2010-2015 Chevrolet Camaro. Hardware included.This Part Fits: Year Make Model Submodel 2010-2015 ...

Drop-in fuel pump hanger for GM vehicles (Cadillac CTS, Camaro, etc). Can be used with one or two aftermarket high-flow fuel pumps (not included). ...

Low profile swivel fitting. Screws into a 10AN ORB female port. Features a 3/4" SAE quick connect male connection.

Fuel fill block-off plate for Radium Engineering FCST-X surge tanks.

Anodized aluminum. For use with OEM hose connection. Converts to 10AN male.

Drop-in surge tank system for competition fuel cells. Designed for Walbro F90000-series pumps. One lift pump and three primary pumps included. Eas...

Radium Engineering Fitting 2AN ORB Plug

Radium Engineering Spring Clamp 1/4 Hose

Replacement fuel cell outer can for Radium R10A 10 Gallon. Does NOT include inner bladder.

Refueling kit for Radium Engineering FCST-X equipped fuel cells. Featuring remote mounted filler with screw off cap, 1.5" x 3ft fill hose, angled f...

Refueling kit for Radium Engineering FCST-X equipped fuel cells. Featuring a direct mounted fill neck with screw off cap and 8AN vent line.

Drop-in surge tank system for competition fuel cells. Single lift pump and primary pump included. Easily serviceable with new lift-out fuel pump m...

Bolt-on fuel filler neck for remote filling. 3-Bolt flange compatible only with Radium FCST-X surge tanks.

Dual catch can kit for the 2005-2013 Chevrolet Corvette. Interfaces with crankcase vent hose and PCV line to intercept oil and other contaminants a...

Outlet cap for Radium fuel filters that has an integrated check valve. Can be used to convert any Radium fuel filter to have a check valve.

Female dry break recepticle for mounting on exterior body work of vehicle. Only compatible with Radium dry break systems.

Radium Engineering Catch Can Kit BMW E46 3-Series Fluid Lock

Stainless steel and aluminum construction. Screws into a 12AN ORB female port and provides a 12AN male flare that swivels 360 degrees. Suitable for...

Service O-rings for Radium Engineering fuel filters.

In-tank fuel pump hanger for the 2014-2019 Chevrolet Corvette. Compatible single aftermarket fuel pump (sold separately). Can add a second fuel pum...

Fuel cell vent valve with roll-over protection. Screws into a 12AN ORB female port.

Single catch can kit for the GM trucks of the early 2000's. Mounts to firewall and includes bracket, fittings and hoses. Includes Radium's Fluid Lo...

Radium Engineering 8AN Dry Break 27mm Fitting Outer