Borla

Notched necks for easy clamp-on installation. Reversible design for installation flexibility. High-quality T-304 austenitic stainless steel will ne...

This 3.5" into dual 2.75" diameter Borla(r) Cat-Back(tm) system was specifically designed to enhance the power and sound of the Chevrolet Tahoe and...

This extension pipe is used to adapt the Borla(r) 147.4" Wheelbase Cat-Back(tm) systems to fit Crew Cab with Standard Bed (6' 7") 157" Wheelbase ve...

Extension pipe 60693 is used to adapt Borla(r) Cat-Back(tm) systems 140798, 140798BC, 140843, and 140843BC to Super Duty trucks with a Crew Cab wit...

Compact size is perfect for applications with limited space. Reversible design for installation flexibility. The 401338 resonator is ideal for taki...

This 2.5" diameter into dual 2" tail pipes Borla(r) Cat-Back(tm) system is tuned for performance and sound for the 2.4L engine in the BRZ and GR86....

The 3" into dual 2.25" Borla(r) Cat-Back(tm) system was specifically designed to enhance the power and sound of the Ford F-150 equipped with 2.7L a...

The Borla(r) 140797 ATAK(r) Cat-Back(tm) is tuned for sound and performance specifically for the 5.3L engine in the Silverado and Sierra 1500. For ...

Borla(r) presents their Axle-Back system for the fourth generation Mazda 3 Hatchback. The 2.5" diameter into dual 2" system replaces the stock rear...

Use these adapters that have Male Ball Flare Outlets with Borla(r) Cat-Back(tm) system 140723 and REUSE O.E. Tips that have a Female Ball Flare Inl...

Adapter Kit allows Borla(r) Cat-Back(tm) systems 140837, 140837BC, and 140837CF to be used on 202+1-2023 Mustang Mach 1 vehicles. Adapter Kit inclu...

Transverse 'T' Flow design. Single 2.5" inlet on side of muffler body with dual 2.5" offset outlets, one on each end of the muffler body. The inter...

This extension pipe is used to adapt the 147.4" Wheelbase Borla(r) systems to vehicles with Crew Cab with Standard Bed (6' 7") 157" wheelbase. 3" I...

This X-Pipe with Mid-Pipes has been developed specifically for the Mustang GT. It is used to connect to Borla(r) Axle-Back systems creating a full ...

Borla(r) presents our high clearance Y-Pipe for the Toyota Tacoma 3.5L V6. Our Y-Pipe removes the Y-Pipe from under the transfer case and reroutes ...

Replace the small muffler behind the primary muffler in the Borla(r) S-Type system with Polyphonic Harmonizer 60680 to attain the ATAK(r) sound lev...

Replace the Polyphonic Harmonizer behind the primary muffler in the Borla(r) ATAK(r) system with muffler 60679 to attain the S-Type sound level (qu...

This tip kit contains 2) tip assemblies with a total of 4) outlets. These single 3" Inside Diameter (I.D.) Inlet with dual 4" Outside Diameter (O.D...

This tip kit contains 2) tip assemblies with a total of 4) outlets. These single 3" Inside Diameter (I.D.) Inlet with dual 4" round Outside Diamete...

This optional resonator is used when additional sound reduction is desired. 3" diameter inlet and outlet. It is designed to be used with the Borla(...

These 3" diameter tail pipes are designed to work with either Borla(r) 60637, 60638, 60731, or 60732 mid-sections / muffler assemblies, or the Orig...

Borla(r) system is a True Dual design. This Mid-Section includes a merge X-Pipe and ATAK(r) mufflers for increased performance and our distinctive ...

This extension pipe is used to fit the 140680 & 140680BC systems to the longer Wheelbase 140.6" Double (Crew) Cab with Long Bed (6' 1") models....

Borla(r) Hanger/ Isolator Kit is designed for use with custom installations. They can be welded to any muffler neck, Borla(r) Pipe Bracket Kit, or ...

Dual 2.25" diameter inlet, dual 2.5" outlet Resonator contains an internal H-Pipe for increased performance and improved sound. Use this resonator ...

Fits vehicles With or WITHOUT AFM Valves and / or NPP Valves. Borla(r) 2.75" diameter Merge X-Pipe 60548 works perfectly between the factory cataly...

These 2.75" diameter Over Axle Mid-Pipes are recommended to be used with the Borla(r) Axle-Back system and X-Pipe to complete a Cat-Back(tm) system...

This 2.75" diameter performance Merge X-Pipe is designed to unleash power while adding a great sound. Increased exhaust velocity adds power, drivin...

For those who have purchased our Axle-Back system or GM Performance rear mufflers and are looking to upgrade with a 2.5" diameter Merge X-Pipe with...

High quality austenitic stainless steel. Patented, race-winning XR-1 Raceline technology. 3 options: Offset - Made with the same patented, flow thr...

High quality austenitic stainless steel. Patented, race-winning XR-1 Raceline technology. 3 options: Offset - Made with the same patented, flow thr...

High quality austenitic stainless steel. Patented, race-winning XR-1 Raceline technology. 3 options: Offset - Made with the same patented, flow thr...

High quality austenitic stainless steel. Patented, race-winning XR-1 Raceline technology. 3 options: Offset - Made with the same patented, flow thr...

High quality austenitic stainless steel. Patented, race-winning XR-1 Raceline technology. 3 options: Offset - Made with the same patented, flow thr...

Perfect for applications with limited space. Reversible design for installation flexibility. High-quality T-304 austenitic stainless steel will nev...

Single inlet and dual outlet. Reversible design for installation flexibility. This muffler is generally used in a system that has a single inlet an...

Reversible design for installation flexibility. High-quality T-304 austenitic stainless steel will never rust. 100% welded construction for strengt...

Compact size is perfect for applications with limited space. Reversible design for installation flexibility. High-quality T-304 austenitic stainles...

Compact size is perfect for applications with limited space. Reversible design for installation flexibility. High-quality T-304 austenitic stainles...

Compact size is perfect for applications with limited space. Reversible design for installation flexibility. High-quality T-304 austenitic stainles...

Transverse Flow design. Transverse flow mufflers were originally designed for GM F-Body Camaros and Firebirds. On these vehicles they were mounted ...

Transverse Flow design. Transverse flow mufflers were originally designed for GM F-Body Camaros and Firebirds. On these vehicles they were mounted ...

Reversible design for installation flexibility. High-quality T-304 austenitic stainless steel will never rust. 100% welded construction for strengt...

Reversible design for installation flexibility. High-quality T-304 austenitic stainless steel will never rust. 100% welded construction for strengt...

Reversible design for installation flexibility. High-quality T-304 austenitic stainless steel will never rust. 100% welded construction for strengt...

Reversible design for installation flexibility. High-quality T-304 austenitic stainless steel will never rust. 100% welded construction for strengt...

Single inlet and dual outlet. Reversible design for installation flexibility. This muffler is generally used in a system that has a single inlet an...

Reversible design for installation flexibility. High-quality T-304 austenitic stainless steel will never rust. 100% welded construction for strengt...