This low profile swiveling fitting screws into a 6AN ORB port and has a hose barb at 90 degree angle. Safe for use with all types of fluid. Constru...
View full detailsStainless steel and aluminum construction. Screws into a 6AN ORB female port and provides a hose barb connection that swivels 360 degrees. Suitable...
View full detailsThis fitting screws into any female 6AN ORB port and provides a 360 degree swiveling 3/8 SAE quick connect male. This low profile fitting is safe ...
View full detailsThis 90 degree swivel fitting screws into a 6AN ORB female port and has a male 5/16 SAE quick connect fitting. Compatible with all fuels and oils.
360 degree swiveling fitting. Screws into a 6AN ORB port and features a 10mm hose barb.
Radium Engineering 6AN ORB Swivel Banjo to 8AN Male
Swiveling fitting that will screw into a 6AN ORB port and provides a 6AN ORB female to use. Stainless steel and aluminum construction.
This low profile swiveling fitting screws into a 6AN ORB port and has a 6AN male at 90 degree angle. Safe for use with all types of fluid. Construc...
View full detailsSwiveling fitting. Stainless steel and aluminum construction. Suitable for most fluids.
Swiveling fitting. Stainless steel and aluminum construction. Suitable for most fluids.
Stainless steel and aluminum construction. Swivels 360 degrees after installation. Compatible with most fluids.
Press-in valve cover breather fitting. Features a 10AN male 360 degree swiveling fitting. Compatible with all K-series valve covers that have the p...
View full detailsThis fitting presses into the Nissan RB25DET valve cover and will work on either intake or exhause side. Presents a swiveling 10AN male fitting fo...
View full details
Save 5%
Radium Engineering Nissan S13 SR20DET 10AN Male Press-Fit Valve Cover Fitting - Exhaust Side
Press in valve cover fittings for the Nissan S13 SR20DET (red and black top). Exhaust side. Double sided 10AN male connections.
Press-in fitting breather fitting for the Nissan KA24DE valve cover. 10AN male swivels 360 degrees. Stainless steel and aluminum construction.
This stainless steel and aluminum fitting presses into the S14/S15 Nissan SR20DET valve cover on the intake side and replaces the PCV valve with a ...
View full detailsAdapter fitting clips on to the valve cover vent fitting on the BMW B58 engine and converts to a 10AN male.
This swivel fitting installs into the BMW B58 valve cover found on the A90/A91 GR Toyota Supra. It allows connection of a 10AN hose.
High flow distribution block designed to work with large -10AN and -12AN lines. Can combine three lines into one. Safe for use with alternative fue...
View full detailsReplacement fitting for Radium Engineering Direct Mount Regulators (Gen 2 design).
Press in fitting that swivels after installation. 10AN male. Made for 17.5mm hole.
Low profile adapter for SAE quick-connect lines. 90 degree elbow, converts to 6AN male. Compatible with all fuel types.
Low profile adapter for SAE quick-connect lines. 90 degree elbow, converts to 6AN male. Compatible with all fuel types.
Catch can fitting with integrated steel ball. This valve closes when inverted to prevent oil loss out of the fitting in case of an accident. Alumin...
View full detailsUniversal in-line check valve with adapter fittings. Can be set up for a variety of hose -AN sizes. Compatible with all fluids.
Universal in-line check valve with adapter fittings. Can be set up for a variety of hose -AN sizes. Compatible with all fluids.
Press fit swiveling low profile -AN adapter. Commonly used in valve covers. Stainless steel body with anodized aluminum swiveling -10AN male fitting.
Pack of 15 aluminum acorn nuts. 10-32 thread. Non conductive. For use with Radium electrical studs.
Radium Engineering 12AN Female Fitting to Air Filter
For use with the Radium Engineeing Evo X fuel pump hanger. This small part plugs the hole for the fuel tank pressure sensor. In some parts of the w...
View full detailsLine and fittings for remote mounting a pressure gauge or pressure transducer. 1/8NPT compatible. Gauge sold separately.
Radium Engineering 5/16in SAE Female to 6AN Male Low Profile
Radium Engineering 3 Into 1 Distribution Block w/ Fittings
Fuel pulse damper that can be used in-line with a fuel hose. Comes with adapter for 5/16 hose-barb connections
INSTALLATION INSTRUCTIONS AVAILABLE AT RADIUMAUTO.COM
Requires a 9/16-18 threaded hole with chamfer to be drilled into the mating part for sealing. Barb is 8.5mm
Radium Engineering Fuel Surge Tank 6AN Bulkhead Plate w/ Fittings and Nuts
Radium Engineering 0-100 PSI Fuel Pressure Gauge w/ 8AN Adapter
high strength double-layed cotton filtration element
Reduces fuel slosh noise and prevents fuel back flow
Radium Engineering Electrical Bulkhead Stud Kit (Pack of 6)
Hose end for 10AN size push-lock compatible hose. 60 degree end fitting. Black anodized aluminum.
Adapter fitting. 8AN ORB male to 10mm hose barb male. Aluminum.
Adapter fitting. 6AN ORB male to 10mm male hose barb. Aluminum.
Wrench-together 8AN 90-degree hose end for use with Radium universal PTFE Hose Kits.
Wrench-together 8AN straight hose end for use with Radium universal PTFE Hose Kits.
Wrench-together 6AN 90-degree hose end for use with Radium universal PTFE Hose Kits.
Wrench-together 6AN straight hose end for use with Radium universal PTFE Hose Kits.
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}
